D-4 Govt Industrial Estate, Talkatora Road, Lucknow-226001
Ph. Office: 2661763 Ph. Factory: 2661894 Mobile: 9415004117, 9415016332
E-mail- excelplastics@rediffmail.com
 
     
 
ORGANIZATION PROFILE:-
 
 


Excel Plastics was established in 1972 by two brothers, Sri. R.C.Chaturvedi and Sri G.C.Chaturvedi. Excel Plastics manufactures injection moulded PVC fittings for potable water supplies & various other applications as well as Tara Hand Pump Accessories in uPVC, HDPE & Polyacetal. We are the oldest manufacturer of these products in U.P. since 1972.
The product is manufactured under Excelplast brand name. The products of the company are widely used in a variety of applications.

 
     
 
PRODUCT RANGE SUITABLE FOR POTABLE WATER SUPPLIES:-
 
 
1.
Sockets
20mm to 160mm
2.
Female Th. Sockets
20mm to 110mm
3.
Male Th. Sockets
20mm to 110mm
4.
Elbows
20mm to 110mm
5.
Tees
20mm to 110mm
6.
End Cap
20mm to 160mm
7.
Tail Piece
20mm to 160mm
8.
Tail Piece Flanges
90, 110 and 125mm
9.
Single as well as multi-stage reducing sockets
25mm to 160mm
10.
45 degree Bends half sets
90 and 110mm
11.
Nahani Traps
63, 90 and 110mm
12.
Service saddles
32mm to 160mm
 
     
 
ABOUT OURSELVES:-
 
     
 
We are a small scale unit having more than 35 years of experience in designing, manufacturing and quality control of the above mentioned products and also have a good team of qualified and experienced man power for the quality control to fulfill the customer’s requirement and get their 100 percent satisfaction. Every process regarding the manufacturing and quality control is being done under one roof to achieve better products.
 
     
 
TECHNOLOGY:-
 
     
 
We are using best quality fully automatic injection moulding machines manufactured by reputed manufacturers in this line in the country.
 
     
 
1.
One injection moulding machine of 200gm capacity manufactured by M/s. Krill Standard Products of Baroda.
2.
One injection moulding machine of 300gm capacity manufactured by M/s. Indomax, Ahmedabad.
3.
Two injection moulding machine of 450gm capacity each manufactured by M/s. R.H. Windsor India Ltd., Mumbai.
 
     
 

We have been on rate contract with the Directorate of Industries, U.P., Kanpur for the last more than 20 years for the supply of our fittings to all government departments and their undertakings in U.P.
U.P. Jalnigam who is pioneers in the use of PVC pipes in the state are one of our largest consumers in the state.
A wide variety of our fittings suitable for potable water supplies carry ISI certification mark also and have a brand image in the market.
Apart from uPVC, we also have experience of processing polyethylene, polystyrene, polypropylene, polycarbonate, polyacetal, nylon and A.B.S. spares as per customers specifications and designs.
We have tooling facilities viz. Lathe, Shaper, Drilling & Grinding machines installed in our premises where we develop moulds and dies for ourselves as well as outside customers.

 
     
 
The advantages of the PVC pipe fittings are given below:-
 
     
 
1.
Light Weight: - The EXCELPLAST uPVC pipe fittings are light in weight in comparison to conventional pipes from GI or CI.
2.
Better Flow: - Smooth internal surfaces reduce frictional losses in fluid flow thereby helping achieve a higher and smoother flow rate. This means reduction in pressure drop and lower requirement of pumping water.
3.
Greater Durability: - Non rusting and chemically inert; EXCELPLAST pipe fittings do not chip or dent, thereby resulting in long life.
4.
Economical: - As compared to conventional pipe fittings, EXCELPLAST PVC pipe fittings are lower priced.
5.
Fire Resistance: - PVC is self- fire extinguishing. Therefore EXCELPLAST PVC pipe fittings are fire resistant. They do not require any protective paints/ chemicals
6.
Electrical Insulation: - PVC is non-conductor of electricity.
 
     
  A Member of Indian Industries Association (IIA) – apex Representative of Micro Small & Medium Enterprises  
  At IIA we make Your Presence felt